Woollacott 11.5 Cutter Ketch

Price AU $29,900 Huge price reduction SOLD

AU $29,900 Huge price reduction
Quest presents in very good condition being well maintained and upgraded by her owner of over 10 years. Designed by Mr. Bert
Woollacott patriarch of the family of respected boat builders/designers from Devonport, Auckland
N. Z. And was professionally built in Auckland New Zealand. The hull has been constructed in the
traditional manner being Carvel planked over 38mm x 20mm laminated ribs set at 170mm centres. All
copper nailed and roved. 70-80mm wide keel floors ranging from 200-280mm deep are fitted at
approximately 500mm centres above the 400mm wide keelson. The 20mm and 25mm bronze keel bolts
secure through the solid wood floors. A 95mm x 65mm solid wood frame runs from Gunwale to
gunwale on the mast bulkhead at the forward end of the saloon. The vessels deck shelf measures
90mm x 60mm. The hull was epoxy splined and tripled sheathed in Dynel cloth set in an epoxy resin
matrix. This was carried out at Redland City marina in 2010. The hull was then spray painted to a
professional standard in a two pack paint system. The deck is planked in New Zealand kauri over
40mm x 50mm solid wood deck beams set at 330mm centres and was originally sheathed with canvas.
The canvas was removed and the decks splined and epoxy sheathed by the current owner at
Scarborough marina in 2011. They were then spray painted to a professional standard in two pack
paint system. New Maxwell aluminium deck hatches were fitted at this time.
The vessels construction is best described as "Robust"
- 48hp Perkins 4108, spare parts ( filters, belts etc) Workshop paper manual included
- Set up for living aboard or cruising
- 6 x batteries with large solar panels, solar controller and volt metre
- Great stainless galley, sink, new engel firdge, and gas hot water and stove/grill
- Ramarine Auto pilot, wind and Hybrid touch multi screen with depth, GPS charts
- Orca Anchor winch with controll at helm and foot pedals at bow. 20kg Mason plough anchor with 50m of 8mm chain
- Furling Main with vertical battens, furling Genoa and inner jib plus mizzen with boom cover. Top quality Lewmar self tailers. Top quality Ronstan Genoa tracks and cars are fitted. New pole for Genoa
- Sleeping in V berth plus two single berths with lee cloths. 3 x 12v fans
- Safety gear includes life lines with 2 harnesses, Epirb, VHF radio, flares, lifejackets
- Electric toilet with H/C water in shower in head, trasnsom shower and galley
- 80 litre fuel tank with an extra 100 litres stored in fuel containers. Approx 200 litre water tank
- Stainless Davits
- Tender- Skip Inflatables 2.4m PVC907 -VALMEX 7318 Ultralight Series RIB (UL240) - 3mm marine grade aluminum hull, Valmex 7318 PVC
Tubes. Purchased on 17 December 2020 for $2396.00 which included a discount of $544.55. It is still within the 5 year warranty.
Outboard - 3.5hp Mercury 4 stroke was purchased on 17 December 2020 for $1400.00

2017 Survey attached for greater detail
Please call Christian on 0450545246 to discuss or arrange an inspection
New South Wales
Balmain NSW
37' 9" - 11.50m
Approx 8000kgs
Hull Material
Mizzen boom cover and Sunbrella boom/ boat cover
Ground Tackle
"Orca" 12 volt vertical dual direction capstan which is operated by a pair of foot switches on deck and a
dual direction rocker switch from the cockpit. 20kg Mason plough anchor with 50m of 8mm chain

Contact us for more information