Timber Motor Cruiser ( Converted Trawler)

Price AU $124,000 Or nearest offer SOLD

Price
AU $124,000 Or nearest offer
Details
San Pietro is a 50 foot Timber Motor Cruiser (converted trawler) Canoe back / double ender.
16' beam; 34.0 tonne displacement; 6' draft; 4 x blade propeller (4' dia. ).
Built in Newcastle, NSW and launched 1964. Hardwood (spotted gum) below the waterline
and Oregon above.
Built as a fishing trawler, initially working out of Sydney harbour for the first few years, then
spending the remainder of its time working out of Nelson Bay, Port Stephens.
Retired as a fishing boat in approx. 2005.
The fishing gear was removed from the rear deck and wheelhouse extended approx. 3.0m
Purchased by its current owner in July 2015, with extensive work being carried out to make
it a comfortable live-aboard vessel or a very comfortable day cruiser.
The only outstanding works are the completion of the bedroom to new owners'
requirements and the installation of a hot water system. Plumbing has already been
installed to all tap fittings for hot water and there is a GPO in place in the rear gas bottle
compartment for a semi-recessed LPG instantaneous hot water unit to be installed on the
starboard side, adjacent to this compartment.
The engine is a CATERPILLAR 3406 B which is a strong and reliable power plant.
There are 2 / 2000 litre fuel tanks onboard giving this boat considerable range for exploring.
The engine start batteries are connected to a trickle charger, power by the solar system
(plugged into the inverter). This keeps the engine start batteries at full charge between use.
The engine room ceiling is fully insulated with 100mm high density insulation.
The boat has a modern galley with a full-size fridge freezer, brand new oven and drawers stocked with a
generous quantity of crockery and utensils. There is also clever storage provided for food
and provisions within the dinette seat. The dinette has been custom made with matching
upholstery and a clever and functional teak table.
The bathroom is compact but complete, with a shower, basin and shaving cabinet and a
TECMA macerating toilet.
Part of the original fish hold has been used to house poly tanks for both fresh water and
black/grey water. There is more than 800 litres capacity for fresh water and another 800
litres for waste water. The fill point for fresh water and pump out point for black/grey water
are located on the rear deck against the cabin wall.
The boat has a 1.5 kw solar system with batteries and an inverter for 240v. All light fittings
have been replaced with LED and the solar system has a remote monitoring point fitted to
the dash to allow you to check the power storage and usage and can also interrogate the
solar system for further information.
Inclusions:
- POLYCRAFT 3.0m Tuff Tender with HONDA 2.3hp 4 stroke outboard and paddles.
NB: There is a davit fitted to the boat with a pendant control for lifting the tender on
& off then roof. The controls can be operated from both the roof and the side deck.
- 5 / Fenders 900mm long x 300mm dia. Secured to the starboard side
- 1200mm wide (triple) REELAX helm seat on SPRINGFIELD slide adjustable mountings
(forward / back).
- 3 / Ottomans with storage within for lifejackets (included), etc. With cushions.
- Custom seating to rear deck
- New aluminium hatch to rear hold area
- 3kv HONDA petrol genset
- THOR winch with rode counter on dash. Foot control for winch operation from front
deck included but not installed / connected. 50kg Bruce
- Large swim ladder
- Hull antifouled and re caulked February 2022
- 2022 Survey available upon request

Please call Christian on 0450545246 if you would like to discuss or arrange an inspection.
Region
New South Wales
Location
Balmain NSW
Year
1964
Length
50' - 15.24m
Beam
16 feet
Draft
6 feet
Displacement
34 tonne
Hull Material
Timber

Contact us for more information